| 电抗器电感测量接线方法 |
| 添加时间：2019/7/13 16:08:46 浏览次数： |
| 电抗器电感测量接线方法 Wiring method for inductance measurement of reactor （1）接线方法同测量电容时一样，只是被测试品为电感； (1) The connection method is the same as that of capacitance measurement, but the tested product is an inductance. （2）开机按【确认】后屏幕显示主菜单画面，将光标移至【设置】处，进入第3屏设置参数，将【等效阻抗】设为【串联电感】模式。按【确认】键并存入设置值，回到主菜单。 (2) The main menu screen is displayed on the back screen of boot press [confirmation]. The cursor is moved to [setting]. The parameters are set on the third screen. The [equivalent impedance] mode is set to [series inductance]. Press the [confirmation] key and save the settings to the main menu. （3）将光标移至【测量】处，按确认进入测量状态。 (3) Move the cursor to the position of measurement and enter the measurement state according to the confirmation. （4）将【电压输出开关】置于【通】的位置即进行电感测量。 (4) The inductance measurement is carried out by placing the voltage output switch in the on position. |
| 上一页 电容电感测试仪面板 |
| 下一页 选购“氧化锌避雷器带电测试仪”要注意一下几点 |
Copyright © 技术支持：遨游网络