| 全自动电容电感测试仪采用桥式电路结构 |
| 添加时间：2019/6/19 14:24:32 浏览次数： |
| 全自动电容电感测试仪采用桥式电路结构，标准电容器和被试电容器作为桥式电路的两臂。 The full-automatic capacitance and inductance tester adopts bridge circuit structure. The standard capacitor and the tested capacitor are used as two arms of the bridge circuit. 当进行电容器电容值测量时，测试电压同时施加在标准电容器和被试电容器上，处理器通过传感器同采集流过两者的电流信号并进行处理后得也被试电容器的电容值 When capacitance value of capacitor is measured, the test voltage is applied to both standard capacitor and tested capacitor. The processor collects current signals flowing through both capacitor and standard capacitor through sensor, and after processing, the capacitance value of the tested capacitor can be obtained. |
| 上一页 选购“氧化锌避雷器带电测试仪”要注意一下几点 |
| 下一页 仪器采用背光大屏幕液晶显示器 |
Copyright © 技术支持：遨游网络