返回首页

河北电气厂-氧化锌避雷器带电测试仪,电感检测仪

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
变压器中性点配置关键原则
添加时间:2018/9/25 14:46:04     浏览次数:
1、在双母线运行时,应考虑当母联开关跳闸后,保证被分开的两个系统至少应有一台变压器中性点接地;
1. When two buses are running, it should be considered that when the bus switch trips, at least one transformer neutral grounding should be ensured for the two separated systems.
2、变压器中、低压侧有电源时,则变压器中性点必须直接接地,以防止高压侧断路器跳闸,变压器成为中性点绝缘系统;
2. The neutral point of the transformer must be grounded directly to prevent the circuit breaker from tripping and the transformer becomes the neutral point insulation system when there is power supply in the middle and low voltage side of the transformer.
3、发电机—变压器—线路组的主变压器中性点应保持接地运行。
3. The neutral point of the main transformer of the generator transformer line group should be kept grounded.
上一页  变压器容量测试仪功能特点及用途  
下一页  电感检测仪使用注意事项
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3